Thank you for your interest in our products. This questionnaire gives you the opportunity to inform us about specifications of your application. 1 Start 2 Preview 3 Complete Your contact details Company address * Your E-Mail * Contact information * Please write one or more contact information (e.g. phone number, fax, etc.) Your name * Here are some ways to help us find the right solution for you. On the basis of the information, we can offer you the suitable product or propose a customer-specific solution. Please tick the appropriate box. At some point, a numeral value is necessary. For which application the sensor product is intended? drinking water disinfection industrial water disinfection ballast water disinfection air disinfection analysis technology medicine technology hardening processes Other application (please specify) For which application the sensor product is intended? Other application (please specify) Wave length Wave length range UV-ABC (200nm - 380nm) UV-C (200nm - 280nm) UV-B (280nm - 315nm) UV-A (315nm - 380nm) Specific wave length range (please specify) Wave length range Specific wave length range (please specify) Standards Does the UV-system accord to a special standard? DVGW W294-3 standard ÖNORM M5873-1 standard without standard other standard (please specify) Does the UV-system accord to a special standard? other standard (please specify) Output Which output signal is required at the UV-sensor? Current loop [4-20mA] Voltage output [0-4,5V] Relative signal [diode current] ILMcom - digital output [RS485] Customized signal output (please specify) Which output signal is required at the UV-sensor? Customized signal output (please specify) Information about UV lamp Number of lamps in operation (e.g. inside UV reactor) n = Electrical power P of one UV lamp (W) p = Lamp arc length [cm] l = UV radiation source Hg-UV low pressure lamp HG-UV medium pressure lamp Other UV radiation source (please specify) UV radiation source Other UV radiation source (please specify) Dimensional requirements Distance r between sensor and lamp [cm] r = Hints: The sensor should be aligned to a UV source. Experience has shown that small sensor radiator distances are more advantageous (about 1-2 cm). The reactor design should not adversely affect the beam path between the sensor and the radiator. additional requirements Do you need information / offers for accessories? UV monitor UV measurement window Connection cable Additional notes: Do you need information / offers for accessories? Additional notes: Attachments Files must be less than 256 MB.Allowed file types: gif jpg jpeg png bmp eps tif pict psd txt rtf pdf doc docx odt ppt pptx odp xls xlsx ods zip. Leave this field blank